Floor Choice, Inspiration

When off-the-shelf won’t do: recreating a New York hotel floor

The herringbone floor at the Carlyle Hotel, New York, whose colour inspired the project

Our client had fallen for a herringbone floor at the Carlyle Hotel in New York. They didn’t want something a bit like it. They wanted that colour, in their Knightsbridge home. But not that pattern: the shape of their space, with its long corridor, suited a chevron far better. So the brief was the Carlyle’s exact colour scheme, laid as a chevron.

We get this request more than you’d think, and it’s harder than it sounds. You can’t copy a floor from a photo or a memory. You get there with samples.

Why one sample is never enough

Hotel lighting is designed to flatter. A floor that looks rich and dark under warm lamps at 9pm can look quite different in a hallway on a grey Tuesday morning.

So we made sample after sample, adjusting the colour and the texture each time, until the finish was exactly right. It’s slower than pointing at a sample board. It’s also the only way to end up with a floor you’ll still love in twenty years.

What we made: a smoked, textured chevron

The floor is an oak chevron with a textured surface, so you can feel the grain underfoot and it catches the light as you walk down the corridor.

Then it was smoked. That means the boards go into a sealed chamber full of ammonia. The ammonia reacts with the natural tannins in the oak and darkens the wood itself, not just the surface. Every board has a slightly different amount of tannin, so every board darkens slightly differently. That’s where the depth and the natural colour variation come from, and it’s something a stain on its own can’t fake.

We did use dark stains on top. But not too dark. Go too far and a chevron turns into a flat brown sheet, and you lose the pattern you’ve paid for. The smoking does the heavy lifting. The stain just sets the tone.

Smoked and stained chevron oak boards on a drying rack

If you want to know why some oak floors vary more from board to board than others, our piece on Fresh Cut vs Half Cut oak explains it.

Sized for the corridor

Chevron isn’t a pattern you can start at one wall and hope for the best. The width and length of the boards decide where the points land. Get it wrong and you end up with a lopsided pattern, or a thin sliver of chevron running down one wall.

So we designed the board size around the corridor, so the pattern runs perfectly down its length. You’d never notice it was planned. You’d definitely notice if it wasn’t.

The bit nobody sees

Over 100m² of chevron is a big floor. The work underneath it was just as big.

Ripping out the old glued floor. The existing floor was glued down. (If you’re wondering whether to glue or float your own floor, here’s why the way it’s fitted matters.) Glued floors don’t lift out neatly. They come up in pieces, and they leave adhesive and damage behind on the subfloor.

Latexing. A chevron needs a flat base. With that many joints, any dip or hump shows up as a gap or a board that moves underfoot. So we latexed the subfloor: a self-levelling compound that gives a smooth, level surface to fit onto. It’s one of the costs people forget to budget for, so we’ve set out real prices for the floor, subfloor and fitting.

Moisture suppression. Concrete and screed can hold moisture for a long time, and moisture is the thing a wood floor hates most. We put down a moisture suppression layer before fitting, so the new floor stays exactly where we put it.

Managing the furniture. Rooms full of furniture had to be worked around as the job moved through the house. Including a grand piano. (You don’t just slide one of those into the next room.)

The fitting

Then, finally, the floor itself: well over 100m² of chevron, laid point by point down the corridor and through the house. Chevron goes down in a similar way to herringbone, which we walk through in our herringbone fitting guide.

The result

Finished smoked, textured oak chevron floor running down the corridor

A floor that started as a memory of a hotel stay, and is now theirs. Smoked deep, textured, varying naturally from board to board, and running perfectly down the corridor.

Seen a floor somewhere you can’t stop thinking about? A hotel, a members’ club, a restaurant, a friend’s kitchen? Bring us the photos. We’ll make samples until we get there, and if it can’t be done at a sensible price, we’ll tell you.

Come and see samples at our Shoreditch showroom, or book online here.